FMVSS302 Intelligent Automotive Interior Combustion Tester for EV

FMVSS302 Intelligent Automotive Interior Combustion Tester

Product Introduction

This tester is designed and manufactured in accordance with the relevant provisions of the ISO 3795 standard. It is suitable for horizontal combustion testing of automotive interior materials (sedans, MPVs, trucks, and buses). The automotive interior combustion tester features an integrated design consisting of a test unit and a control unit, facilitating on-site installation and commissioning. The control system is highly automated and includes an automatic ignition function. A digital display of temperature and time facilitates observation and recording, ensuring stable and reliable operation.

Compliant Standards

FMVSS 302 Federal Motor Vehicle Safety Standard 302

ISO 3795 Road Vehicles - Tractors and Machinery for Agricultural and Forestry Use - Determination of the Flammability of Interior Finishing Materials

GB/T 8410-2006 Flammability of Automotive Interior Materials

Other Relevant Standards:

SAE J369:2003 -- American Society of Mechanical Engineers

HES D6003-99 -- Honda

NES M0094:2003 -- Nissan

ES-X60410:2001 -- Mitsubishi Motors

TRANS/WP29/78/Rev.1:1997 Appendix 4 -- European Union

TL 1010:1997 -- Volkswagen

GS 97038-2003 -- BMW

GM 9070P: 1996 - General Motors

Equipment Features:

1) Advanced Industrial Appearance and Control Design;

1. Stainless Steel Housing; Bottom Ventilation Hole Spacing: 63.5mm Horizontal, 127mm Vertical.

2. Number of Ventilation Holes: 10, 19mm Diameter.

3. Burner Inner Diameter: 9.5mm Φ. The tip of the blowtorch is 19mm below the center of the specimen's free end.

4. Flame Application Time and Timing (Burn Time)

5. Adjustable from 0 to 9999 seconds.

6. Tempered Glass Door for Convenient Test Observation;

7. Equipped with: Stainless Steel Sample Holder and Sample Template;

8. Built-in Steel Ruler in the Combustion Chamber; Accuracy: 1mm; Easy to Read Burning Length; Measure Burning Length Without Removing the Specimen;

9. Imported Bunsen Burner from Hamburg, USA, for Higher Flame Accuracy, Adjustable from 20mm to 100mm. 10. Imported brand flow control valve for precise flame height control;

11. Imported brand pressure gauge and pressure control valve;

12. Flame measuring device; flame height 38mm

13. Built-in thermocouple to monitor chamber temperature according to standard requirements.

2)Patented test chamber design: Because the combustion heat in this test is high and residue is abundant, the interior is easily contaminated. This patented design offers easy cleaning features as follows:

1. The transparent glass of the combustion chamber is retractable for easy cleaning.

2. The top cover of the combustion chamber is removable.

3. The side door can be opened freely.

4. The combustion chamber can be opened on all three sides for easy cleaning.

3)Combustion safety design: Because the combustion chamber is prone to dripping, this patented design eliminates any exposed electrical wiring or gas lines, ensuring no explosion risk from dripping that could melt the gas lines.

4) Highly automated testing ensures accurate test data and easy operation.

5) Programmable Logic Controller (PLC) with touch screen automatic control system.

1. Automatic timing, automatic ignition, and ignition error protection.

2. Data storage for up to six samples.

3. Text display.

4. Real-time monitoring of test data, querying test data for up to six samples, and checking alarm conditions. Specific Parameters:

1. Imported blowtorch inner diameter: 9.5mm Φ;

2. Distance from the top of the blowtorch to the lower center of the specimen's free end: 19mm;

3. Flame measuring device: Flame height indicator: 38mm from the blowtorch tip;

4. Automatic extinguishing after 15 seconds; Time accuracy: 0.1s;

5. Distance from the bottom of the specimen to the top of the combustion chamber: 182mm;

6. Metal wire length: 1800mm;

7. Thermometer range: 500°C; Accuracy: 1°C;

8. Steel ruler: Accuracy: 1mm; Length: 300mm;

9. Ten ventilation holes in the chamber bottom, 19mm diameter;

10. Imported high-precision flow control valve;

11. Gas type: Liquefied petroleum gas (LPG); not supplied by the customer;

12. Heat-resistant wire spacing: 25mm;

13. Distances between the specimen clamp support points: 38mm, 100mm, and 154mm.